Precut interior sauna packages are standard in western red cedar for horizontal installation.
Warranty: 5 Years
Make a wise investment today and invest in a Harvia pre-cut sauna room. With this investment, you are making one of the wisest choices that you can regarding the market. This particular sauna room styling is one of our most popular with good reason; a high quality sauna room with all of the space that you could need to enjoy utter relaxation and recuperation.
We highly recommend that you come along and check out our Harvia pre-cut sauna room collection. This should give you all of the help that you need to easily find a sauna room that feels right for you, that feels welcoming and comforting, and ensures that you have the space that you need to complete any activities that you have in mind.
Make life easier; invest in a Harvia pre-cut sauna room and make sure that you can get your sauna set-up in a fraction of the expected time.
FPC PACKAGES INCLUDE:
- 1" x 4" Western Red Cedar Wall & Ceiling Boards
- Assembled 2" x 2" or 2"x 4" Benches
- Prehung 2' 0" Fir Door With Clear Glass
- KIP-45-B1 Heater With Built In Controls
- Stones
- 0301K Wood Thermometer
- 102N Bucket With Liner
- 106/40 Dipper
- 079 Headrest
- P5511 Wall Light
- Foil
- Nails
- SD12 Superdek
- Heater Fence
- Vents
Heater Specification
- Voltage: 240V
- Phase 1
- Amperage: 18.8 Amp
- Power: 4.5 kW
- Wire size: 10
- Equipped with timer
- Built-in control panel
- Thermostat and timer can be relocated
- Wall mounted unit
- Large stone space
- Outer casing temperature is left unaffected
- Desired sauna temperature is set by turning the knob
- Thermostat on lower part of heater
- Thermostat and timer are located on right or left side of the heater, as the requirement
- 100-210 min - max. cu.ft. sauna room
- HEATERS HAVE 5 YEARS LIMITED WARRANTY when installed according to Finlandia specifications and wiring information
*The floorplan sizes signify interior stud to stud measurements and bench widths. Any of these layouts may be modified to fit your needs. All rooms are made per order.
| Brand | Harvia |
|---|---|
| Number of Seats | 3 |
| Number of benches | 2 |
Preparation for FPC Sauna Package:
- Frame room to desired size using wood or metal studs. Our T&G boards are nailed directly to the wood frame. Metal studs require drywall and 1x2 (3/4" thick) wood nailing strips.
- Lower ceiling to 7 0" from finished floor.
- Frame door rough opening to 26" x 82" for standard 2' 0" door.
- Frame in an upper and a lower vent box with rough opening of 4" x 10".
- Install rough electrical for Sauna heater, wall light, and wall control (if applicable). Single gang rough in for wall light should be 78" from the floor or 6” below the ceiling.
- Insulate all walls and ceiling with R-13 fiberglass batt insulation.
- Install waterproof floor of tile, vinyl, or cement. A drain in the Sauna is optional for residential but is recommended for commercial use. FPC Package does not include a solid surfaced floor.
- Finish the exterior Sauna walls with drywall or some type of paneling. Finlandia does not provide exterior paneling for FPC packages unless it is requested.
