Precut interior sauna packages are standard in western red cedar for horizontal installation.
Warranty: 5 Years
Thinking of making changes at home? Then you should consider investing in one of our Harvia pre-cut sauna room options. this particular 84 x 84 x 84 sauna room gives you ample space for enjoying a relaxing and comfortable sauna experience at home.
The size also ensures that finding space for it in your property should not be an issue. Easily fitted and installed, a Harvia pre-cut sauna room can be the ideal choice when you want to ensure that you can really enjoy looking after yourself once again. It’s a tough thing to get right, but it is by no means impossible. So, why not take a look and see what you could do for yourself with the help of a Harvia pre-cut sauna room?
It’s the ideal choice for anyone who wants to enjoy home sauna satisfaction from an affordable home sauna that provides the room you need.
FPC PACKAGES INCLUDE:
- 1" x 4" Western Red Cedar Wall & Ceiling Boards
- Assembled 2" x 2" or 2"x 4" Benches
- Prehung 2' 0" Fir Door With Clear Glass
- KIP-80-B1 Heater With Built In Controls
- Stones
- 0301K Wood Thermometer
- 102N Bucket With Liner
- 106/40 Dipper
- 079 Headrest
- P5511 Wall Light
- Foil
- Nails
- SD12 Superdek
- Heater Fence
- Vents
Heater Specification
- Voltage: 240V
- Phase 1
- Amperage: 33.3 Amp
- Power: 8 kW
- Wire size: 8
- Equipped with timer
- Built-in control panel
- Thermostat and timer can be relocated
- Wall mounted unit
- Large stone space
- 1-8 hour delay feature
- Thermostat and timer are located on front, right or left side of the heater, as the requirement
- 250-425 min - max. cu.ft. sauna room
- HEATERS HAVE 5 YEARS LIMITED WARRANTY when installed according to Finlandia specifications and wiring information
*The floorplan sizes signify interior stud to stud measurements and bench widths. Any of these layouts may be modified to fit your needs. All rooms are made per order.
| Brand | Harvia |
|---|---|
| Number of Seats | 7 |
| Number of benches | 4 |
Preparation for FPC Sauna Package:
- Frame room to desired size using wood or metal studs. Our T&G boards are nailed directly to the wood frame. Metal studs require drywall and 1x2 (3/4" thick) wood nailing strips.
- Lower ceiling to 7 0" from finished floor.
- Frame door rough opening to 26" x 82" for standard 2' 0" door.
- Frame in an upper and a lower vent box with rough opening of 4" x 10".
- Install rough electrical for Sauna heater, wall light, and wall control (if applicable). Single gang rough in for wall light should be 78" from the floor or 6” below the ceiling.
- Insulate all walls and ceiling with R-13 fiberglass batt insulation.
- Install waterproof floor of tile, vinyl, or cement. A drain in the Sauna is optional for residential but is recommended for commercial use. FPC Package does not include a solid surfaced floor.
- Finish the exterior Sauna walls with drywall or some type of paneling. Finlandia does not provide exterior paneling for FPC packages unless it is requested.
