Precut interior sauna packages are standard in western red cedar for horizontal installation.
Warranty: 5 Years
With one of our various pre-cut sauna room options, you can soon remove much of the stress and challenge of getting involved in home building and DIY sauna development. At Aqualine, we are proud to work with a wide range of different companies that we know can deliver the utmost quality sauna solutions for our clients. That’s why we are delighted to offer you a Harvia pre-cut sauna room.
Sizeable, spacious, and perfectly suited to the kind of property that you working on; this is why the Harvia pre-cut sauna room is such a popular starting place. This can give you every opportunity that you need to ensure that you can enjoy an easy building project without missing out on any of the key factors that can make a sauna room so satisfying.
We highly recommend that you look into buying a Harvia pre-cut sauna room for simplicity, safety, and structural sizing that you can trust 100%.
FPC PACKAGES INCLUDE:
- 1" x 4" Western Red Cedar Wall & Ceiling Boards
- Assembled 2" x 2" or 2"x 4" Benches
- Prehung 2' 0" Fir Door With Clear Glass
- KIP-80-B1 Heater With Built In Controls
- Stones
- 0301K Wood Thermometer
- 102N Bucket With Liner
- 106/40 Dipper
- 079 Headrest
- P5511 Wall Light
- Foil
- Nails
- SD12 Superdek
- Heater Fence
- Vents
Heater Specification
- Voltage: 240V
- Phase 1
- Amperage: 33.3 Amp
- Power: 8 kW
- Wire size: 8
- Equipped with timer
- Built-in control panel
- Thermostat and timer can be relocated
- Wall mounted unit
- Large stone space
- 1-8 hour delay feature
- Thermostat and timer are located on front, right or left side of the heater, as the requirement
- 250-425 min - max. cu.ft. sauna room
- HEATERS HAVE 5 YEARS LIMITED WARRANTY when installed according to Finlandia specifications and wiring information
*The floorplan sizes signify interior stud to stud measurements and bench widths. Any of these layouts may be modified to fit your needs. All rooms are made per order.
| Brand | Harvia |
|---|---|
| Number of Seats | 5 |
| Number of benches | 4 |
Preparation for FPC Sauna Package:
- Frame room to desired size using wood or metal studs. Our T&G boards are nailed directly to the wood frame. Metal studs require drywall and 1x2 (3/4" thick) wood nailing strips.
- Lower ceiling to 7 0" from finished floor.
- Frame door rough opening to 26" x 82" for standard 2' 0" door.
- Frame in an upper and a lower vent box with rough opening of 4" x 10".
- Install rough electrical for Sauna heater, wall light, and wall control (if applicable). Single gang rough in for wall light should be 78" from the floor or 6” below the ceiling.
- Insulate all walls and ceiling with R-13 fiberglass batt insulation.
- Install waterproof floor of tile, vinyl, or cement. A drain in the Sauna is optional for residential but is recommended for commercial use. FPC Package does not include a solid surfaced floor.
- Finish the exterior Sauna walls with drywall or some type of paneling. Finlandia does not provide exterior paneling for FPC packages unless it is requested.
